Things Needed to Install Gingerbread on Ace
To flash your Ace with new firmware on windows you will require Odin. Then you can search and download the new firmware named S5830XXKP8 from tsar3000.com. If you are facing problem downloading the file you can also download it from here.
Setting Up Odin
Once these files are downloaded extract the files. Odin is a portable application hence can be brought up with a single click. Remember to take care of files that you are going to put in Odin. Open the firmware folder which you just extracted. You will find 5 files namely:
APBOOT_S5830XXKP8_CL143019_REV03_user_mid_false.tar.md5
CODE_S5830XXKP8_CL143019_REV03_user_mid_false.tar
Cooper_v1.0.ops
CSC_S5830SERKP8_CL143019_REV03_user_mid_false.tar.md5
MODEM_S5830XXKP8_CL143019_REV03.tar.md5
Open odin and point OPS, BOOT, Phone, PDA and CSC files from the firmware folder as follows.
OPS- Cooper_v1.0.ops
BOOT- APBOOT_S5830XXKP8_CL143019_REV03_user_mid_false.tar.md5
Phone- MODEM_S5830XXKP8_CL143019_REV03.tar.md5
PDA- CODE_S5830XXKP8_CL143019_REV03_user_mid_false.tar
CSC- CSC_S5830SERKP8_CL143019_REV03_user_mid_false.tar.md5
Pointing these files in Odin completes the configuration part. There is no need to change any other settings. Before proceeding to the next step make sure that Samsung Kies is not running, if so close it.
Preparing Galaxy Ace for Flash
Remove the SIM card and SD card from the phone. now what you have to do is start the phone in download mode. To do this, while you are switched off press and hold the following buttons in sequence.
Middle Menu Button+ Power Button+ Down Volume Buttom. Make sure you do not disturb the sequence. Else other modes may come up. Once the phone boots in download mode the phone setup is ready.
Flashing Galaxy Ace with Gingerbread
Now connect the phone to your computer using data cable. You will find some drivers installing and Odin will automatically identify connection com port. Ensure that the data cable is fixed properly so that connection is not lost in between the process.
When all the above things are done, Click on the start button. Wait till the process gets over. You can see process status at left hand corner of Odin. The phone will be restarted automatically and will take bit time to finally start with Gingerbread.
The default language of this Firmware is not English, if you want to change it to English, go to settings and select the fifth last option. There you can select the language of your choice.
Ace Gingerbread cannot be rooted using previous applications like the Super One Click which rooted previous versions easily. I will update it as soon as I get a way to root it.Taking screenshots i.e holding Back key + Menu button works without being rooted.
There are no problems in the firmware and every thing is working properly. If you have noticed lag in contact menu in Froyo, this may solve your problem as i did not find any such lags. There are many other small performance improvements.
Still Confused about upgrading? Well, you can watch this video tutorial to go through the flashing process and also have a glimpse of Gingerbread.
0 comments:
Post a Comment